DTC C1095, C1096 [DSC/RSC]
DTC C1095, C1096 [DSC/RSC] DETECTION CONDITION AND POSSIBLE CAUSE
2
(See
ON-BOARD DIAGNOSTIC
[DSC/RSC]
.)
z
Are the same DTCs present?
(See
DSC/RSC HU/CM
REMOVAL/INSTALLATION
.)
No
Go to the next step.
3
VERIFY AFTER REPAIR
PROCEDURE.
z
Are any other DTCs present?
Yes
Go to the applicable DTC inspection.
(See
ON-BOARD DIAGNOSTIC [DSC/RSC]
.)
No
DTC troubleshooting completed.
DTC C1095, C1096 Pump motor, motor relay system
DETECTION
CONDITION
z
C1095
{
ABS motor monitor OFF signal is input within specified time limit when the
motor signal is switched from ON to OFF by DSC/RSC HU/CM.
z
C1096
{
When pump motor monitor voltage continues for
0.05s
more than
0.75V
among the pump motor ON.
POSSIBLE CAUSE
z
ABS 50A fuse malfunction
z
Open or short to ground circuit in the wiring harness between the battery and the
DSC/RSC HU/CM terminal AK
z
Open circuit in the wiring harness between the DSC/RSC HU/CM terminal B and
the body ground
z
Open or short circuit in the DSC/RSC HU/CM internal motor relay, or stuck motor
relay
z
Open or short circuit in the DSC/RSC HU/CM internal motor, or frozen motor
z
Motor relay malfunction
z
Poor connection at connectors (female terminal)
2008 Mazda CX-9 Grand Touring
2008 BRAKES On-Board Diagnostic (DSC/RSC) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:50:13 AM
Page 18
© 2005 Mitchell Repair Information Company, LLC.
