Mazda CX-9 Grand Touring 2008, Руководство пользователя

Страница: 33 / 2589

z
Turn the ignition switch to the LOCK position.
z
Disconnect the negative battery cable and wait
for 1 min or more.
z
Disconnect the driver-side side air bag sensor
No.1 connector.
z
Is there any malfunction of the driver-side side
air bag sensor No.1 connector?
(See AIR BAG SYSTEM SERVICE
CAUTIONS .)
No Go to the next step.
2
INSPECT WIRING HARNESS BETWEEN
DRIVER-SIDE SIDE AIR BAG SENSOR NO.1
AND SAS CONTROL MODULE
z
Turn the ignition switch to the LOCK position.
z
Disconnect the negative battery cable and wait
for 1 min or more.
z
Remove the column cover. (See COLUMN
COVER REMOVAL/INSTALLATION .)
z
Disconnect the clock spring connector. (See
COMBINATION SWITCH
REMOVAL/INSTALLATION
.)
z
Remove the glove compartment. (See GLOVE
COMPARTMENT
REMOVAL/INSTALLATION
.)
z
Disconnect the passenger-side air bag module
connector. (See PASSENGER-SIDE AIR
BAG MODULE
REMOVAL/INSTALLATION .)
z
Disconnect the driver and passenger-side front
seat connectors. (See
FRONT SEAT
REMOVAL/INSTALLATION .)
z
Disconnect the driver and passenger-side curtain
air bag module connectors. (See CURTAIN
AIR BAG MODULE
REMOVAL/INSTALLATION .)
z
Remove the B-pillar lower trim. (See B-
PILLAR LOWER TRIM
REMOVAL/INSTALLATION .)
z
Disconnect the driver and passenger-side pre-
tensioner seat belt connectors. (See
FRONT
SEAT BELT
REMOVAL/INSTALLATION
.)
Yes
Replace the driver-side side air bag
sensor No.1, then go to the next step.
(See
SIDE AIR BAG SENSOR NO.
1 REMOVAL/INSTALLATION .)
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:18:46 AM Page 33 © 2005 Mitchell Repair Information Company, LLC.