4. Cover the disconnected quick release connector and fuel pipe with vinyl sheeting or a similar material to
prevent it from scratches or dirt.
Fig. 40: View Of Quick Release Connector
Courtesy of MAZDA MOTORS CORP.
INSTALLATION
1. Inspect the fuel hose and fuel pipe sealing surface for damage and deformation.
z
If there is any malfunction, replace it with a new one.
2. Install the quick release connector.
z
Insert the fuel pipe straight to the end of the quick release connector.
z
Push down the retainer using a finger.
If the retainer cannot be pushed down, push the fuel pipe further to the quick release
connector.
3. Lightly pull and push the quick release connector a few times by hand, and then verify that it is connected
securely.
4. Inspect all related parts by performing "AFTER SERVICE PRECAUTION". (See
AFTER SERVICE
PRECAUTION [MZI-3.7]
.)
Fig. 41: View Of Quick Release Connector
NOTE:
z
If the quick release connector O-ring is damaged or has slipped, replace
the fuel hose.
2008 Mazda CX-9 Grand Touring
2008 ENGINE Fuel System (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:04:45 AM
Page 31
© 2005 Mitchell Repair Information Company, LLC.
