Fig. 43: Identifying Activation Switch
Courtesy of MAZDA MOTORS CORP.
PRE-TENSIONER SEAT BELT
1. Remove the B-pillar lower trim.
(See
B-PILLAR LOWER TRIM REMOVAL/INSTALLATION
.)
2. Remove the pre-tensioner seat belt and connect the
SST (Adapter harness)
as shown in the figure. (See
FRONT SEAT BELT REMOVAL/INSTALLATION
.)
3. Install the pre-tensioner seat belt.
Fig. 44: Connecting SST To Pre-Tensioner Seat Belt
Courtesy of MAZDA MOTORS CORP.
4. Connect the
SST (Deployment tool)
to the
SST (Adapter harness)
.
5. Connect the
SST (Deployment tool)
to the battery. Connect the power supply red clip to the positive
battery terminal, and the black clip to the negative battery terminal.
6. Verify that the red lamp on the
SST (Deployment tool)
is illuminated.
7. Verify that all persons are standing
at least 6 m {20 ft}
away from the vehicle.
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS Air Bag System - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:16:38 AM
Page 33
© 2005 Mitchell Repair Information Company, LLC.
