Fig. 52: Identifying TCM, Manual Shaft Lever & Selector Cable
Courtesy of MAZDA MOTORS CORP.
NEUTRAL POSITION LEARNING
1. Engage the parking brake and use wheel chocks at the front and rear of the wheels.
2. Connect the M-MDS to the DLC-2.
3. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
1. Select "Power train".
2. Select "Transmission".
z
When using the PDS (Pocket PC)
1. Select "All Tests and Calibrations".
4. Then, select the "Transmission Learning".
5. Perform the N range learning according to the directions on the screen.
z
When "Operation Successful" is displayed, shift the selector lever to the P position and turn the
ignition switch to the LOCK position, then to the ON position
after 5 s.
z
If "Reinstall TCM properly and then try again" is displayed, perform the following inspection:
Fig. 53: Identifying DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
Verify that the transaxle manual shaft is in the N position.
2008 Mazda CX-9 Grand Touring
2008 TRANSMISSION Automatic Transaxle (AW6A-EL, AW6AX-EL) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:29:31 AM
Page 47
© 2005 Mitchell Repair Information Company, LLC.
