TCM REMOVAL/INSTALLATION [AW6A-EL, AW6AX-EL]
1. Disconnect the negative battery cable.
2. Remove the air cleaner component. (See
INTAKE-AIR SYSTEM REMOVAL/INSTALLATION
[MZI-3.7]
.)
3. Disconnect the TCM connector.
4. Remove the clip and disconnect the selector cable.
B20
Vehicle
speed (+)
VSS
B19 and B20 (wiring
harness-side).
[AW6A-EL,
AW6AX-EL]
z
Inspect relate
harness
B21
Shift
solenoid F
control
Shift
solenoid F
z
Inspect
resistance
between
couple
component
terminals
B21 and
B16
(wiring
harness-
side).
ATF
temperature:
20°C {68°
F}
5.0-5.6 (ohms)
z
Inspect shift
solenoid F (Se
SOLENOID
VALVE
INSPECTIO
[AW6A-EL,
AW6AX-EL]
z
Inspect relate
harness
B22
Shift
solenoid E
control
GND
Shift
solenoid E
z
Inspect
resistance
between
couple
component
terminals
B14 and
B22
(wiring
harness-
side).
ATF
temperature:
20°C {68°
F}
5.0-5.6 (ohms)
z
Inspect shift
solenoid E (S
SOLENOID
VALVE
INSPECTIO
[AW6A-EL,
AW6AX-EL]
z
Inspect relate
harness
CAUTION:
z
Water or foreign material entering the connector can cause a poor
connection or corrosion. Be sure not to allow water or foreign
material on the connector when disconnecting.
CAUTION:
z
Do not use an impact wrench. Hold the manual shaft lever when
removing the manual shaft nut, or the transaxle may be
damaged.
2008 Mazda CX-9 Grand Touring
2008 TRANSMISSION Automatic Transaxle (AW6A-EL, AW6AX-EL) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:29:30 AM
Page 41
© 2005 Mitchell Repair Information Company, LLC.
