BOOT BAND (WHEEL SIDE) ASSEMBLY NOTE
1. Adjust clearance A by turning the adjusting bolt of the
SST.
Clearance A 2.9 mm {0.11 in}
Fig. 61: Adjusting Clearance
Courtesy of MAZDA MOTORS CORP.
2. Crimp the wheel side small boot band using the
SST.
Verify that clearance B is within the specification.
z
If clearance B is more than the specification, reduce clearance A of the
SST
and crimp the boot
again.
z
If clearance B is less than the specification, replace the boot band, increase clearance A of the
SST,
and crimp the new boot.
Fig. 60: Bending Locking Clips
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLES Drive Shaft - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:50:58 AM
Page 39
© 2005 Mitchell Repair Information Company, LLC.
