14. Install the lock unit to the bracket. (See
SELECTOR LEVER COMPONENT
REMOVAL/INSTALLATION
.)
15. Rotate the slider pin to release the lock and verify that it slides freely.
16. Verify that the slider pin contacts the brake pedal stopper rubber and rotate the slider pin to lock.
Fig. 12: Inspecting Slider Pin Contacts Brake Pedal Stopper Rubber
Courtesy of MAZDA MOTORS CORP.
17. Install the interlock cable end to the interlock link on the selector lever.
18. Fit the interlock cable in the U-groove in the selector lever base plate and install the clip.
Fig. 13: Identifying Interlock Cable And Clip Of Selector Lever Base Plate
Fig. 11: Identifying Hole B And Hole C Of Lock Unit
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 TRANSMISSION Automatic Transaxle Shift Mechanism - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:30:13 AM
Page 6
© 2005 Mitchell Repair Information Company, LLC.
