PARKING BRAKE SHOE REMOVAL NOTE
1. Pull the parking brake shoe downward and disengage it from the shoe stopper.
2. Press the adjuster bolt and tappet by hand, and slowly remove the parking brake shoe.
OPERATION LEVER, PIN, ADJUSTER BOLT AND NUT, TAPPET INSTALLATION NOTE
1. Install the operation lever, pin, adjuster bolt and nut, and tappet so that the adjuster nut is facing toward
the vehicle front.
2. Completely tighten the adjuster bolt and nut.
3. Move the operation lever by hand and verify that it operates properly.
z
If proper operation cannot be verified, reinstall.
Fig. 19: Identifying Operation Lever, Pin, Adjuster Bolt, Nut & Tappet
Courtesy of MAZDA MOTORS CORP.
NOTE:
z
When removing the parking brake shoe, firmly press the adjuster bolt
and tappet by hand and slowly remove the parking brake shoe to
prevent the adjuster bolt, tappet, operation lever and other parts from
flying off.
Fig. 18: Pulling Parking Brake Shoe
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 BRAKES Parking Brake System - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:48:01 AM
Page 14
© 2005 Mitchell Repair Information Company, LLC.
