Fig. 54: Identifying Pin & Fastener
Courtesy of MAZDA MOTORS CORP.
5. Apply glass primer along the hollowed marks in the ceramic coating on the new glass, along the sealant
tracks on the reused glass, then allow it to dry for
approx. 30 min.
6. Cut away the old sealant using a razor or scraper so that
1-2 mm {0.04-0.079 in}
thickness of sealant
remains along the perimeter of the frame.
7. If the sealant has come off completely in any one place, apply some primer after degreasing, and allow it
approx. 30 min
to dry. Then apply
2 mm {0.079 in}
thickness of new sealant.
8. Clean and degrease the bonding surface along the perimeter of the body.
9. Apply body primer on the body as shown in the figure, then allow it to dry for
approx. 30 min.
CAUTION:
z
To prevent weakening of the primer adhesion, keep the bonding
surface free of dirt, moisture, and grease. Do not touch the
surface with your hand.
NOTE:
z
Apply primer to the hollowed marks in the ceramic coating.
Fig. 55: Applying Primer To Hollowed Marks In Ceramic Coating
Courtesy of MAZDA MOTORS CORP.
CAUTION:
z
To prevent weakening of the primer adhesion, keep the bonding s
free of dirt, moisture, and grease. Do not touch the surface with y
hand.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Glass/Windows/Mirrors - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:36:16 AM
Page 39
© 2005 Mitchell Repair Information Company, LLC.
