1. Insert a flathead screwdriver into the upper mount rubber bracket notch.
Fig. 13: Removing Upper Mount Rubber Bracket Notch
Courtesy of MAZDA MOTORS CORP.
2. Apply force in the direction shown by the arrow.
Fig. 14: Applying Force In Upper Mount Rubber Bracket Notch
Courtesy of MAZDA MOTORS CORP.
RADIATOR REMOVAL NOTE
1. Remove the radiator from above the engine compartment.
THERMOSTAT REMOVAL/INSTALLATION [MZI-3.7]
WARNING:
z
Never remove the cooling system cap or loosen the radiator drain
plug while the engine is running, or when the engine and radiator are
hot. Scalding engine coolant and steam may shoot out and cause
serious injury. It may also damage the engine and cooling system.
z
Turn off the engine and wait until it is cool. Even then, be very
careful when removing the cap. Wrap a thick cloth around it and
slowly turn it counterclockwise to the first stop. Step back while the
pressure escapes.
2008 Mazda CX-9 Grand Touring
2008 ENGINE Cooling System (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:57:25 AM
Page 14
© 2005 Mitchell Repair Information Company, LLC.
