TRIM REMOVAL/INSTALLATION
.)
4. Remove the bass-box. (BSM control module (LH) only) (Vehicles with Bose®) (See
BASS-BOX
REMOVAL/INSTALLATION
.)
5. Remove the BSM control module with the connector connected.
6. Measure the BSM control module terminal voltage using the short wiring harness connector in the
position shown in the figure.
Fig. 17: Identifying Trunk End Trim & BSM Control Module Short Wiring Harness Connector
Courtesy of MAZDA MOTORS CORP.
TERMINAL VOLTAGE TABLE (REFERENCE)
NOTE:
z
The BSM control module connector cannot be connected to a tester
due to its water-resistance processing, therefore the short wiring
harness connector is used for measuring the terminal voltage.
z
If the terminal voltage is not as indicated in the table, inspect the
short wiring harness connector for continuity. (See CONTINUITY
INSPECTION OF SHORT WIRING HARNESS CONNECTOR.) If the
short wiring harness connector is normal, inspect the parts under
"Inspection items".
{
If the system does not work properly even though the parts or
related wiring harnesses do not have any malfunction, replace
the BSM control module.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Instrumentation/Driver Info - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:42:27 AM
Page 31
© 2005 Mitchell Repair Information Company, LLC.
