7
{
Corrosion
z
Connect all the PCM connectors and
verify that they seat correctly.
z
Retrieve DTCs using the M-MDS.
z
Is the PENDING CODE for this DTC
present?
No
The system is correctly. Go to the next step.
8
VERIFY TROUBLESHOOTING OF
DTC P260F HAS BEEN COMPLETED
z
Verify that all disconnected
connectors reconnected.
z
Clear the DTC from the PCM
memory using the M-MDS.
z
Perform the KOEO or KOER self-test
using the M-MDS.
(See
KOEO/KOER SELF TEST
[MZI-3.7]
.)
z
Is the PENDING CODE for the DTC
present?
Yes
Replace the PCM, then go to the next step. (See
PCM REMOVAL/INSTALLATION [MZI-
3.7]
.)
No
Go to the next step.
9
VERIFY AFTER REPAIR
PROCEDURE
z
Perform "AFTER REPAIR
PROCEDURE". (See
AFTER
REPAIR PROCEDURE [MZI-
3.7]
.)
z
Are any DTCs present?
Yes
Go to the applicable DTC inspection. (See
DTC
TABLE [MZI-3.7]
.)
No
Troubleshooting completed.
2008 Mazda CX-9 Grand Touring
2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:08:44 AM
Page 422
© 2005 Mitchell Repair Information Company, LLC.
