Fig. 31: Identifying Coupler Component Connector Terminal
Courtesy of MAZDA MOTORS CORP.
OFF-VEHICLE INSPECTION
1. Disconnect the negative battery cable.
2. Remove the VSS. (See
VEHICLE SPEED SENSOR (VSS) REMOVAL/INSTALLATION [AW6A-
EL, AW6AX-EL]
.)
3. Connect the VSS terminal 2 to the battery positive terminal, connect the battery negative terminal to VSS
terminal 1 through an ammeter set to a resistance of
100 ohm.
Fig. 32: Connecting VSS Terminal 2 To Battery Positive Terminal
WARNING:
z
A hot transaxle and ATF can cause severe burns. Turn off the engine
and wait until they are cool before replacing the ATF.
CAUTION:
z
Water or foreign material entering the connector can cause a poor
connection or corrosion. Be sure not to allow water or foreign
material on the connector when disconnecting.
z
Do not damage the terminals.
2008 Mazda CX-9 Grand Touring
2008 TRANSMISSION Automatic Transaxle (AW6A-EL, AW6AX-EL) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:29:30 AM
Page 30
© 2005 Mitchell Repair Information Company, LLC.
