Courtesy of MAZDA MOTORS CORP.
6. Tighten the bolts on the No.1 engine mounting bracket in the order of A, B.
Tightening torque: 93.1-116.6 N.m {9.50-11.8 kgf.m, 68.7-85.9 ft.lbf}
Fig. 140: Identifying Bolts On No.1 Engine Mounting Bracket
Courtesy of MAZDA MOTORS CORP.
7. Teighten the No.1 engine mount bolt C at the specified torque.
Tightening torque: 93.1-116.6 N.m {9.50-11.8 kgf.m, 68.7-85.9 ft.lbf}
8. Install the intermediate shaft installation bolt, and disconnect the steering shaft. (See
STEERING
WHEEL AND COLUMN REMOVAL/INSTALLATION
.)
Fig. 141: Identifying No.1 Engine Mount Bolt
Courtesy of MAZDA MOTORS CORP.
9. Install the transverse member. (See
TRANSVERSE MEMBER REMOVAL/INSTALLATION
.)
10. Install the front under cover A and front under cover B. (See
FRONT UNDER COVER
REMOVAL/INSTALLATION
.)
11. Temporarily tighten the No.3 engine mount bolt and nuts in the order shown in the figure.
2008 Mazda CX-9 Grand Touring
2008 ENGINE Mechanical (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:01:58 AM
Page 86
© 2005 Mitchell Repair Information Company, LLC.
