Fig. 30: Pressing Mounting Rubber Until Mounting Rubber End Comes Out Completely
From Gear Housing
Courtesy of MAZDA MOTORS CORP.
4. Reverse the gear housing, then press the mounting rubber until the mounting rubber end comes out
completely from the other side. At this time, the mounting rubber end and steel pipe are aligned.
Fig. 31: Pressing Mounting Rubber Until Mounting Rubber End Comes Out Completely From
Other Side
Courtesy of MAZDA MOTORS CORP.
STEERING RACK, OIL SEAL (GEAR HOUSING SIDE), INNER GUIDE ASSEMBLY NOTE
1. Apply multi-purpose grease to the oil seal (gear housing side) and Inner guide.
2. Install the plastic bag to the steering rack teeth so as not to damage the oil seal (gear housing side) and the
inner guide, and install the oil seal (gear housing side) and the inner guide to the seal. Move the oil seal
(gear housing side) and the inner guide together with the plastic bag so that they pass the steering rack
2008 Mazda CX-9 Grand Touring
2008 STEERING Power Steering - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:20:35 AM
Page 23
© 2005 Mitchell Repair Information Company, LLC.
