{
If the DTC exists, diagnose the applicable DTC inspection. (See
DTC TABLE [MZI-3.7]
.)
{
If the DTC does not exist and the MIL does not illuminate, diagnose the applicable symptom
troubleshooting.
Fig. 4: Symptom Troubleshooting Flow Chart
Courtesy of MAZDA MOTORS CORP.
ON-BOARD DIAGNOSTIC TEST [MZI-3.7]
DTC READING PROCEDURE
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
z
When using the IDS (laptop PC)
1. Select "Self Test".
2. Select "Modules".
3. Select "PCM".
z
When using the PDS (Pocket PC)
1. Select "Module Tests".
2. Select "PCM".
3. Select "Self Test".
3. Then, select the "Retrieve CMDTCs" and perform procedures according to directions on the M-MDS
screen.
2008 Mazda CX-9 Grand Touring
2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:08:33 AM
Page 5
© 2005 Mitchell Repair Information Company, LLC.
