Fig. 60: Identifying Side Air Bag Module And Nuts
Courtesy of MAZDA MOTORS CORP.
3. Place the padded surface of the side air bag module facing the center of the tire as shown in the figure. To
secure the air bag module to the tire wheel, wrap a wire (cross section
1.25 mm
2
{0.002 in
2
} or more)
through the tire and around the bolts
at least 4 times
.
4. Stack the tire with the side air bag module on top of two tires without wheels. Stack a tire without a wheel
on top of the tire with the side air bag module, and then stack another tire with a wheel on the very top.
WARNING:
z
If the air bag module is not properly secured to the tire, the
tires may fall over by the impact of operation (deployment) and
cause serious injury. To prevent this, secure the air bag
module properly with the padded surface facing the center of
the tire.
Fig. 61: Placing Side Air Bag Module Center Of Tire
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS Air Bag System - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:16:38 AM
Page 42
© 2005 Mitchell Repair Information Company, LLC.
