6. Install in the reverse order of removal.
POWER WINDOW MOTOR REMOVAL/INSTALLATION
1. Fully lower the rear door glass.
2. Disconnect the negative battery cable.
3. Remove the following parts:
Front door
z
Inner garnish (See
INNER GARNISH REMOVAL/INSTALLATION
)
z
Front door trim (See
FRONT DOOR TRIM REMOVAL/INSTALLATION
)
z
Front door speaker (See
FRONT DOOR SPEAKER REMOVAL/INSTALLATION
)
Rear door
z
Inner sail garnish (See
INNER SAIL GARNISH REMOVAL/INSTALLATION
)
z
Rear door trim (See
REAR DOOR TRIM REMOVAL/INSTALLATION
)
z
Rear door speaker (See
REAR DOOR SPEAKER REMOVAL/INSTALLATION
)
4. Remove the bolts.
5. Remove the power window motor from the power window regulator.
6. Disconnect the power window motor connector.
7. Install in the reverse order of removal.
CAUTION:
z
Make sure the cable does not unspool from the drum housing
when installing.
Fig. 14: View Of Rear Power Window Regulator
Courtesy of MAZDA MOTORS CORP.
NOTE:
z
When installing the power window motor to the power window
regulator drum, the drum housing tabs may detach from the door
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Glass/Windows/Mirrors - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:36:16 AM
Page 9
© 2005 Mitchell Repair Information Company, LLC.
