3. Rotate the ball joint five times.
4. Measure the rotation torque of the ball joint using the
SST
and a pull scale.
Tie-rod end rotational torque 0.4-2.7 N.m {4.1-27.5 kgf.cm, 3.6-23.8 in.lbf}
[Pull scale reading: 3.4-25.5 N {0.35-2.60 kgf, 0.8-5.7 lbf}]
5. If not within the specification, replace the tie-rod end.
Fig. 26: Measuring Rotation Torque Of Ball Joint Using And Pull Scale
Courtesy of MAZDA MOTORS CORP.
TIE ROD INSPECTION
1. Inspect the tie rod for bending and damage. Replace it if necessary.
2. Inspect the ball joint for looseness. Replace the tie rod if necessary.
3. Swing the tie rod five times.
4. Measure the swinging torque using a pull scale.
Tie-rod swing torque 0.1-4.0 N.m {1.1-40 kgf.cm, 0.89-35 in.lbf}
[Pull scale reading: 1.0-40.0 N {0.2-4.0 kgf, 0.23-8.99 lbf}]
5. If not within the specification, replace the tie rod.
2008 Mazda CX-9 Grand Touring
2008 STEERING Power Steering - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:20:34 AM
Page 19
© 2005 Mitchell Repair Information Company, LLC.
