or more) prepared before the
procedure do not have to be
new ones and there is no
problem with using the keys
that were used to start the
engine before the procedure.
8
Replacing several parts (PCM, keyless
control module, and steering lock unit)
at the same time.
(See
NO.8 THE PROCEDURE FOR
WHEN SEVERAL PARTS (PCM,
KEYLESS CONTROL MODULE,
AND STEERING LOCK UNIT
) are
Replaced at The Same Time.)
z
Parts to be
replaced
z
Programming
card key
z
Programming
keys (Two or
more)
z
M-MDS
z
Refer to No. 4, No. 6, and
No. 7 above and prepare the
required items according to
the parts to be replaced.
- Replacing the coil antenna.
z
New coil antenna
z
Immobilizer system resetting
is not necessary.
CAUTION:
z
The following conditions may cause poor signal communication
between the key and vehicle, resulting in the engine not starting or a
key registration error. Do not perform any work under the following
conditions:
{
Placing the following items close to the key grip or contacting it.
z
Spare keys
z
Keys for other vehicles equipped with an immobilizer
system
z
Any metallic object
z
Any electronic device, or any credit or other card with
magnetic strips
z
Do not place the following devices in the vehicle while programming,
otherwise programming cannot be performed:
{
Card key
{
M-MDS
{
Personal computer
{
Devices that can send/receive the radio waves
NOTE:
z
The "valid key" used in this manual indicates the key that can start the
engine.
z
If the key adding, programming, clearing, and immobilizer system
construction parts replacement are performed, verify that the all keys can
start the engine within
5 s
after the procedure.
z
When verifying that the engine starts, wait at least
5 s or more
before
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:58 AM
Page 59
© 2005 Mitchell Repair Information Company, LLC.
