Mazda CX-9 Grand Touring 2008, Руководство пользователя

Страница: 50 / 2589

DTC B1057, B1916, B1932, B1934, B1936
DTC B1057, B1916, B1932, B1934, B1936 DETECTION CONDITION AND POSSIBLE CAUSE
4
z
Disconnect the clock spring connector. (See
COMBINATION SWITCH
REMOVAL/INSTALLATION .)
z
Remove the glove compartment. (See GLOVE
COMPARTMENT
REMOVAL/INSTALLATION .)
z
Disconnect the passenger-side air bag module
connector. (See
PASSENGER-SIDE AIR
BAG MODULE
REMOVAL/INSTALLATION
.)
z
Disconnect the driver and passenger-side front
seat connectors. (See FRONT SEAT
REMOVAL/INSTALLATION .)
z
Disconnect the driver-side curtain air bag
module connector. (See CURTAIN AIR BAG
MODULE REMOVAL/INSTALLATION .)
z
Remove the B-pillar lower trim. (See B-
PILLAR LOWER TRIM
REMOVAL/INSTALLATION
.)
z
Disconnect the driver and passenger-side pre-
tensioner seat belt connectors. (See FRONT
SEAT BELT
REMOVAL/INSTALLATION .)
z
Disconnect the SAS control module connectors.
(See SAS CONTROL MODULE
REMOVAL/INSTALLATION .)
z
Inspect the wiring harness between SAS control
module terminal 2AL and passenger-side curtain
air bag module terminal A, SAS control module
terminal 2AH and passenger-side curtain air bag
module terminal B for the following:
{
Short to ground
{
Short to power supply
{
Open circuit
z
Is the wiring harness normal?
Yes
Replace the SAS control module. (See
SAS CONTROL MODULE
REMOVAL/INSTALLATION
.)
No Replace the air bag wiring harness.
DTC
B1057 Driver-side air bag module (inflator No.1) and other air bag module circuits short
B1916 Driver-side air bag module (inflator No.1) circuit short to power supply
B1932 Driver-side air bag module (inflator No.1) circuit resistance high
B1934 Driver-side air bag module (inflator No.1) circuit resistance low
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:18:46 AM Page 50 © 2005 Mitchell Repair Information Company, LLC.