11. Install the C3 clutch component to the oil pump and set a dial indicator as shown in the figure.
12. Apply compressed air as shown in the figure and measure the C3 clutch piston stroke.
Air pressure 200 kPa {2.0 kgf/cm
2
, 29 psi}
C3 clutch piston stroke 0.6 - 0.8 mm {0.024 - 0.031 in}
z
If not within the specification, select an appropriate retaining plate.
Fig. 105: Setting Dial Indicator And Measuring C3 Clutch Piston Stroke
Courtesy of MAZDA MOTORS CORP.
RETAINING PLATE SIZE
FRONT PLANETARY GEAR COMPONENT INPUT SHAFT DISASSEMBLY/ASSEMBLY
Components
Fig. 104: Installing Snap Ring In Groove
Courtesy of MAZDA MOTORS CORP.
Identification mark
Thickness (mm {in})
1
2.8{0.110}
A
2.85{0.112}
2
2.9{0.114}
B
2.95{0.116}
3
3.0{0.118}
C
3.05{0.120}
4
3.1 {0.122}
5
3.2{0.126}
6
3.3{0.130}
7
3.4{0.134}
8
3.5{0.138}
2008 Mazda CX-9 Grand Touring
2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
Microsoft
Sunday, November 15, 2009 10:28:16 AM
Page 54
© 2005 Mitchell Repair Information Company, LLC.
