Specifications
Courtesy of MAZDA MOTORS CORP.
NO.1 ENGINE MOUNT REMOVAL NOTE
1. Remove the front under cover A and front under cover B. (See
FRONT UNDER COVER
REMOVAL/INSTALLATION
.)
2. Remove the transverse member. (See
TRANSVERSE MEMBER REMOVAL/INSTALLATION
.)
3. Remove the intermediate shaft installation bolt, and disconnect the steering shaft. (See
STEERING
WHEEL AND COLUMN REMOVAL/INSTALLATION
.)
4. Remove the No.1 engine mount bracket bolts A and B as shown.
Fig. 130: Identifying No.1 Engine Mount Bracket Bolts
Courtesy of MAZDA MOTORS CORP.
5. Remove the No.1 engine mount No.1 engine mount bracket and the front crossmember as a single unit
(See
FRONT CROSSMEMBER REMOVAL/INSTALLATION
.)
Fig. 131: Identifying No.1 Engine Mount
Courtesy of MAZDA MOTORS CORP.
NO.3 ENGINE MOUNT RUBBER AND NO.4 ENGINE MOUNT BRACKET REMOVAL NOTE
1. Secure the engine and transaxle using an engine jack and attachment.
2008 Mazda CX-9 Grand Touring
2008 ENGINE Mechanical (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:01:58 AM
Page 82
© 2005 Mitchell Repair Information Company, LLC.
