Fig. 20: Removing Holder From Gear Housing Using SST
Courtesy of MAZDA MOTORS CORP.
2. Remove the oil seal from the holder using the SST and a press.
Fig. 21: Removing Oil Seal From Holder Using SST & Press
Courtesy of MAZDA MOTORS CORP.
ADJUSTING COVER DISASSEMBLY NOTE
1. Install two nuts to the bolt across a flat
24 mm {0.94 in}
and tighten them using a wrench.
2. Disassemble the adjusting cover with the bolt and nuts created in Step 1.
Fig. 22: Installing Nuts To Bolt Across Flat
2008 Mazda CX-9 Grand Touring
2008 STEERING Power Steering - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:20:34 AM
Page 16
© 2005 Mitchell Repair Information Company, LLC.
