temperature. (Example: Air pressure changes approx.
10 kPa {0.1 kgf/cm
2
, 1.5 psi}
when the
temperature changes 10 °C {18 °F})
WHEEL UNIT ID REGISTRATION
USING M-MDS
1. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
This function is available for only the IDS (notebook PC).
CAUTION:
z
In an area or a season with varying temperatures, tire
pressure will change due to ambient temperature change.
If the tire pressure is lower than the lower-limit pressure
due to low ambient temperature, the TPMS warning light
may illuminate. Adjust the pressure when the TPMS
warning light illuminates.
z
Do not tilt or use excessive side force when checking air
pressure or inflating the tire with air. Which can provide
enough leverage to easily bend or break the wheel unit.
z
To prevent damage to the valve area of the wheel unit or
pressure loss during air pressure adjustment, use a type B
tool with a round end as shown in the figure, not a type A
tool.
Fig. 4: Identifying Air Pressure Adjustment Tool Types
Courtesy of MAZDA MOTORS CORP.
NOTE:
z
After the wheel unit replacement, registration of the wheel unit
identification codes must be performed.
z
ID registration can be done using the M-MDS, or not using the M-MDS.
2008 Mazda CX-9 Grand Touring
2008 SUSPENSION Wheels and Tires - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:26:54 AM
Page 5
© 2005 Mitchell Repair Information Company, LLC.
