3. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
Select "Body".
Select "Security".
z
When using the PDS (Pocket PC)
Select "Programming".
4. Then, select items from the screen menu in the following order.
z
Select "PATS Functions".
5. Select "Customer Spare Key Programming Enable" or "Customer Spare Key Programming Disable" from
the M-MDS screen menu. The key additional programming procedure is as follows according to the
selected menu:
ADDITIONAL KEY PROGRAMMING PROCEDURE
6. Perform the security access according to the directions on the M-MDS screen. (See
SECURITY
ACCESS PROCEDURE
.)
7. After verifying that the PATS function menu is displayed again on the M-MDS screen, select "Exit (From
This Menu)" to finish the M-MDS procedure.
8. After Step 7, wait
5 s or more
and then turn the ignition switch to the LOCK position.
9. Verify that the all keys can start the engine for
5 s or more
after the procedure.
NO.6 STEERING LOCK UNIT REPLACEMENT PROCEDURE
Condition
z
Have two or more keys to be programmed after the replacement.
Procedure
Setting
Additional key programming procedure
Method using two valid keys Method using the M-MDS
Customer spare key programming enable
-
-
Customer spare key programming disable
X
-
- : Available
x : Unavailable
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:59 AM
Page 70
© 2005 Mitchell Repair Information Company, LLC.
