cranking time before
starting.
[MZI-3.7]
.)
5 Engine stalls.
After start/at idle
The engine stops
unexpectedly at idle
and/or after start or
both.
(See
NO.5 ENGINE
STALLS-AFTER START/AT
IDLE [MZI-3.7]
.)
6 Cranks normally but will not start
The starter cranks
engine at normal
speed but the engine
will not run.
(See
NO.6 CRANKS
NORMALLY BUT WILL
NOT START [MZI-3.7]
.)
7 Slow return to idle
The engine takes more
time than normal to
return to idle speed.
(See
NO.7 SLOW RETURN
TO IDLE [MZI-3.7]
.)
8 Engine runs rough/rolling idle.
The engine speed
fluctuates between the
specified idle speed
and lower speed and
the engine shakes
excessively.
(See
NO.8 ENGINE RUNS
ROUGH/ROLLING IDLE
[MZI-3.7]
.)
9 Fast idle/runs on
The engine speed
continues at fast idle
after warm-up.
The engine runs after
the ignition switch is
turned off.
(See
NO.9 FAST IDLE/RUNS
ON [MZI-3.7]
.)
10 Low idle/stalls during deceleration
The engine stops
unexpectedly at the
beginning of
deceleration or
recovery from
deceleration.
(See
NO.10 LOW
IDLE/STALLS DURING
DECELERATION [MZI-
3.7]
.)
11
Engine
stalls/quits.
Acceleration/cruise
The engine stops
unexpectedly at the
beginning of
acceleration or during
acceleration.
The engine stops
unexpectedly while
cruising.
(See
NO.11 ENGINE
STALLS/QUITS, ENGINE
RUNS ROUGH, MISSES,
BUCK/JERK,
HESITATION/STUMBLE,
Engine runs
rough.
Acceleration/cruise
The engine speed
fluctuates during
acceleration or
cruising.
Misses
Acceleration/cruise
The engine misses
during acceleration or
cruising.
2008 Mazda CX-9 Grand Touring
2008 ENGINE Symptom Troubleshooting (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:10:04 AM
Page 6
© 2005 Mitchell Repair Information Company, LLC.
