Mazda CX-9 Grand Touring 2008, Руководство пользователя

Страница: 20 / 2589

2
z
Turn the ignition switch to the LOCK position.
z
Disconnect the negative battery cable and wait
for
1 min or more.
z
Disconnect the driver-side curtain air bag
module connector. (See CURTAIN AIR BAG
MODULE REMOVAL/INSTALLATION .)
z
Is there any malfunction of the driver-side
curtain air bag module connector?
z
Handling the air bag system components
improperly can accidentally deploy the air
bag modules and pre-tensioner seat belts,
which may seriously injure you. Read the
service warnings and cautions before
handling the air bag system components.
(See AIR BAG SYSTEM SERVICE
WARNINGS .)
(See AIR BAG SYSTEM SERVICE
CAUTIONS .)
Yes Replace the air bag wiring harness.
No Go to the next step.
3
VERIFY WHETHER MALFUNCTION IS IN
DRIVER-SIDE CURTAIN AIR BAG MODULE
OR RELATED WIRING HARNESS
z
Connect the leads of the SST (Fuel and
thermometer checker) or apply 2-ohm
resistance to driver-side curtain air bag module
connector terminals A and B.
z
Set the resistance of the SST (Fuel and
thermometer checker) to the 2-ohm position.
z
Connect the negative battery cable.
z
Turn the ignition switch to the ON position.
z
Are DTCs B1046, B2773, B2774, B2775
and/or B2776 indicated?
Yes Go to the next step.
No
Replace the driver-side curtain air bag
module. (See CURTAIN AIR BAG
MODULE
REMOVAL/INSTALLATION .)
INSPECT WIRING HARNESS BETWEEN
DRIVER-SIDE CURTAIN AIR BAG MODULE
AND SAS CONTROL MODULE
z
Turn the ignition switch to the LOCK position.
z
Disconnect the negative battery cable and wait
for 1 min or more .
z
Remove the column cover. (See COLUMN
COVER REMOVAL/INSTALLATION .)
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:18:46 AM Page 20 © 2005 Mitchell Repair Information Company, LLC.