7. Complete the "AFTER SERVICE PRECAUTION". (See
AFTER SERVICE PRECAUTION [MZI-
3.7]
.)
FUEL INJECTOR REMOVAL NOTE
1. Insert a screwdriver between the injector cup and the clip fingers.
Fig. 43: Identifying Injector Cup & Clip Fingers
Courtesy of MAZDA MOTORS CORP.
2. Rotate the screwdriver to spread the clip fingers and remove them from the injector cup.
3. Pull the injector and clip out of the rail.
4. Remove the clip from the injector according to the following:
1. Grasp the clip with a pair of pliers.
Fig. 44: Identifying Clip Fingers & Notch
CAUTION:
z
Use of a deformed injector retaining clip will cause the injector to not
engage correctly. Always use a new clip when reattaching the
injector, otherwise it may cause the injector to rotate.
NOTE:
z
When rotating the screwdriver to spread the clip fingers, deform
them sufficiently to make sure they release from the notched edge of
the injector cup.
2008 Mazda CX-9 Grand Touring
2008 ENGINE Fuel System (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:04:45 AM
Page 33
© 2005 Mitchell Repair Information Company, LLC.
