Mazda CX-9 Grand Touring 2008, Руководство пользователя

Страница: 59 / 2589

2
z
Turn the ignition switch to the LOCK position.
z
Disconnect the negative battery cable and wait
for 1 min or more.
z
Remove the glove compartment. (See GLOVE
COMPARTMENT
REMOVAL/INSTALLATION .)
z
Disconnect the passenger-side air bag module
connector. (See
PASSENGER-SIDE AIR BAG
MODULE REMOVAL/INSTALLATION .)
z
Is there any malfunction of the passenger-side
air bag module connector?
(See AIR BAG SYSTEM SERVICE
WARNINGS .)
(See AIR BAG SYSTEM SERVICE
CAUTIONS .)
No Go to the next step.
3
VERIFY WHETHER MALFUNCTION IS IN
PASSENGER-SIDE AIR BAG MODULE
(INFLATOR NO.2) OR RELATED WIRING
HARNESS
z
Connect the leads of the SST (Fuel and
thermometer checker) or apply 2-ohm resistance
to passenger-side air bag module (inflator No.1)
connector terminals 1A and
z
1B, and passenger-side air bag module (inflator
No.2) connector terminals 2A and 2B.
z
Set the resistance of the SST (Fuel and
thermometer checker) to the 2-ohm position.
z
Connect the negative battery cable.
z
Turn the ignition switch to the ON position.
z
Are DTCs B1059, B2229, B2231, B2233 and/or
B2235 indicated?
Yes Go to the next step.
No
Replace the passenger-side air bag
module.
(See PASSENGER-SIDE AIR BAG
MODULE
REMOVAL/INSTALLATION .)
INSPECT WIRING HARNESS BETWEEN
PASSENGER-SIDE AIR BAG MODULE AND
SAS CONTROL MODULE
z
Turn the ignition switch to the LOCK position.
z
Disconnect the negative battery cable and wait
for 1 min or more.
z
Remove the column cover. (See COLUMN
COVER REMOVAL/INSTALLATION .)
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:18:47 AM Page 59 © 2005 Mitchell Repair Information Company, LLC.