Fig. 112: Identifying No.3 Engine Mount
Courtesy of MAZDA MOTORS CORP.
CRANKSHAFT PULLEY REMOVAL NOTE
1. Slightly loosen the
SST (49 C017 5A0)
support and tilt the engine to the lower side slightly.
2. Remove the washer from the crankshaft pulley lock bolt, install a suitable spacer (thickness:
approx. 14
mm {0.55 in}
, diameter:
approx. 30 mm {1.18 in})
, (similar to front shock absorber lower nut) to the
crankshaft pulley lock bolt, and install the crankshaft pulley lock bolt to the crankshaft.
Fig. 113: Identifying Crankshaft Pulley Lock Bolt & Spacer
Courtesy of MAZDA MOTORS CORP.
3. Remove the crankshaft pulley using the
SST.
4. Remove the crankshaft pulley lock bolt and spacer.
2008 Mazda CX-9 Grand Touring
2008 ENGINE Mechanical (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:01:57 AM
Page 71
© 2005 Mitchell Repair Information Company, LLC.
