Fig. 279: Identifying Connector Of VSS And Input/Turbine Speed Sensor
Courtesy of MAZDA MOTORS CORP.
Fig. 280: Caution - Wiring Harnesses Are Not Overlapped When Installing Control Valve Body
Cover
Courtesy of MAZDA MOTORS CORP.
84. Apply ATF to a new O-ring and install it on the TFT sensor.
85. Install the TFT sensor with the lock plate and a bolt to the control valve body component as shown in the
figure.
Tightening torque 8 - 12 N.m {82 - 122 kgf.cm, 72 - 105 in.lbf}
CAUTION:
z
If the control valve body cover is installed with the wiring
harnesses overlapped, the wiring harnesses may be pinched
between the cover and valve body causing the wiring harnesses
to be damaged. Therefore, verify that the wiring harnesses are
not overlapped when installing the control valve body cover.
2008 Mazda CX-9 Grand Touring
2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
Microsoft
Sunday, November 15, 2009 10:28:17 AM
Page 151
© 2005 Mitchell Repair Information Company, LLC.
