Fig. 43: Identifying Spacer And Pin
Courtesy of MAZDA MOTORS CORP.
5. Apply glass primer on the glass as shown in the figure then allow it to dry for
approx. 30 min.
6. Cut away the old sealant using a razor or scraper so that
1-2 mm {0.04-0.07 in}
thickness of sealant
remains along the perimeter of the frame.
7. Clean and degrease the bonding area along the perimeter of the body.
8. When reusing the liftgate, apply primer to the area where the sealant has come off completely and allow it
to dry for
approx. 30 min.
CAUTION:
z
To prevent weakening of the primer adhesion, keep the bonding
surface free of dirt, moisture, and grease. Do not touch the
surface with your hand.
NOTE:
z
Apply primer to the hollowed marks in the ceramic coating.
Fig. 44: Applying Glass Primer On Glass
Courtesy of MAZDA MOTORS CORP.
CAUTION:
z
To prevent weakening of the primer adhesion, keep the bonding
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Glass/Windows/Mirrors - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:36:16 AM
Page 32
© 2005 Mitchell Repair Information Company, LLC.
