Fig. 20: Disconnecting Tie-Rod End Ball Joint
Courtesy of MAZDA MOTORS CORP.
STEERING GEAR AND LINKAGE, FRONT STABILIZER, FRONT LOWER ARM AND FRONT
CROSSMEMBER COMPONENT REMOVAL NOTE
1. Support the crossmember component with a jack.
Fig. 21: Supporting Crossmember Component With Jack
Courtesy of MAZDA MOTORS CORP.
2. Disconnect the following parts.
{
Pressure hose eye connector
{
Return hose clamp (steering gear side)
{
Pressure hose bracket
{
Return hose clamp (tank side)
WARNING:
z
Removing the crossmember component is dangerous. The
crossmember component could fall and cause serious injury or
death. Verify that the jack securely supports the crossmember
component.
2008 Mazda CX-9 Grand Touring
2008 SUSPENSION Front Suspension - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:23:19 AM
Page 14
© 2005 Mitchell Repair Information Company, LLC.
