22. Inspect shift lock operation. (See
SHIFT-LOCK INSPECTION
.)
SELECTOR LEVER INSPECTION
1. Turn the ignition switch to the ON position, (engine OFF)
2. With the brake pedal depressed, verify that there is a "click" at each range when shifted.
3. Verify that the selector lever can be shifted.
4. Verify that there is a "click" at each position when shifted from P position to M range.
Fig. 16: Inspecting Click At Each Position When Shifted From P Position To M Range
Courtesy of MAZDA MOTORS CORP.
5. Verify that the positions of the selector lever and the indicator are aligned.
z
If there is any malfunction, adjust the TR switch. (See
TCM REMOVAL/INSTALLATION
[AW6A-EL, AW6AX-EL]
.)
6. Verify that the vehicle operates in each selected range.
Fig. 17: Inspecting Positions Of Selector Lever And Indicator Are Aligned
Courtesy of MAZDA MOTORS CORP.
adjusted, it cannot be adjusted again. Therefore, replace the
switch with a new one when replacing the power brake unit or
the pedal, or performing any procedure that changes the pedal
stroke.
2008 Mazda CX-9 Grand Touring
2008 TRANSMISSION Automatic Transaxle Shift Mechanism - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:30:13 AM
Page 8
© 2005 Mitchell Repair Information Company, LLC.
