Mazda CX-9 Grand Touring 2008, Руководство пользователя

Страница: 79 / 2589

DTC B2477
DTC B2477 DETECTION CONDITION AND POSSIBLE CAUSE
4
z
Connect the seat weight sensor control
module connector.
z
Connect the SAS control module.
z
Connect the negative battery cable.
z
Verify the following PIDs using the
M-MDS. (See PID/DATA
MONITOR TABLE .)
{
OCSFLT_CAL
{
OCSFLT_COM
{
OCSFLT_L
{
OCSFLT_MDL
{
OCSFLT_R
z
Do all PIDs display "OK"?
No
{
Perform seat weight sensor
calibration (See SEAT WEIGHT
SENSOR CALIBRATION .)
z
If OCSFLT_COM or OCSFLT_MDL is
displayed:
{
Seat weight sensor control module
(See SEAT WEIGHT SENSOR
CONTROL MODULE
REMOVAL/INSTALLATION .)
z
If OCSFLT_L is displayed:
{
Seat weight sensor (LH) (See: 09-
13-3 FRONT SEAT
DISASSEMBLY/ASSEMBLY.)
z
If OCSFLT_R is displayed:
{
Seat weight sensor (RH) (See
FRONT SEAT
DISASSEMBLY/ASSEMBLY .)
5
INSPECT SAS CONTROL MODULE
z
Reperform the DTC inspection.
z
Is DTC B2290 indicated?
Yes
[Present malfunction diagnosis]
z
Replace the SAS control module.
(See SAS CONTROL MODULE
REMOVAL/INSTALLATION .)
[Past malfunction diagnosis]
z
DTC troubleshooting completed.
No DTC troubleshooting completed.
DTC B2477 Configuration error
DETECTION
CONDITION
z
SAS control module configuration has not been performed correctly.
WARNING:
z
Detection conditions are for understanding the DTC outline before
performing an inspection. Performing an inspection according to only the
detection conditions may cause injury due to an operating error, or damage
the system. When performing an inspection, always follow the inspection
procedure.
POSSIBLE
z
SAS control module configuration error
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:18:47 AM Page 79 © 2005 Mitchell Repair Information Company, LLC.