23. Start the engine using the card key.
24. Verify that the security light and keyless warning light operate as follows:
z
From the point that ignition switch is turned to the ON position, the security light illuminates
for
approx. 3 s
, and goes out.
z
The keyless warning light illuminate when the ignition switch is turned to the ON position for
approx. 1 min
, and goes out.
25. After verifying that the keyless warning light goes out, turn the ignition switch to the LOCK position.
26. Verify that the all keys can start the engine for
5 s or more
after the procedure.
NO.7 KEYLESS CONTROL MODULE REPLACEMENT PROCEDURE
Condition
z
Have two or more keys to be programmed after the replacement.
z
Have one or more card keys to be programmed after the replacement.
Procedure
NOTE:
z
If three or more keys have already been programmed, perform Steps
19 to 21.
CAUTION:
z
Remove any key from the key cylinder.
z
Close all doors.
z
Bring the card key into the vehicle.
CAUTION:
z
Do not place the following devices in the vehicle while programming,
otherwise programming cannot be performed:
{
Card key
{
M-MDS
{
Personal computer
{
Devices that can send/receive the radio waves
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:59 AM
Page 73
© 2005 Mitchell Repair Information Company, LLC.
