DTC P061F [MZI-3.7]
DTC P061F (MZI-3.7) DETECTION CONDITIONS AND POSSIBLE CAUSES
DIAGNOSTIC PROCEDURE
DTC P061F (MZI-3.7) DIAGNOSTIC PROCEDURE
test". (See
KOEO/KOER SELF
TEST [MZI-3.7]
.)
z
Retrieve DTCs using the M-MDS.
z
Is the PENDING CODE for this DTC
present?
No
Go to the next step.
6
VERIFY AFTER REPAIR
PROCEDURE
z
Perform the "AFTER REPAIR
PROCEDURE". (See
AFTER
REPAIR PROCEDURE [MZI-3.7]
.)
z
Are any DTCs present?
Yes Go to the applicable DTC inspection. (See
DTC
TABLE [MZI-3.7]
.)
No
Troubleshooting completed.
DTC P061F
Internal control module throttle actuator controller performance
DETECTION
CONDITION
z
Indicates that a calculation error occurred in the PCM.
POSSIBLE CAUSE
NOTE:
z
This DTC is an informational DTC and may be set in combination with a
number of other DTCs which are causing the FMEM. Diagnose other
DTCs first.
STEP
INSPECTION
ACTION
1
VERIFY FREEZE FRAME DATA HAS
BEEN RECORDED
z
Has FREEZE FRAME DATA been
recorded?
Yes Go to the next step.
No Record FREEZE FRAME DATA on the repair
order, then go to the next step.
2
VERIFY RELATED REPAIR
INFORMATION AVAILABILITY
z
Verify related Service Bulletins and/or
on-line repair information availability.
z
Is any related Service Bulletins
available?
Yes
Perform repair or diagnosis according to the
available Service Bulletins.
z
If the vehicle is not repaired, go to the
next step.
No
Go to the next step.
VERIFY RELATED PENDING CODE
OR STORED DTCs
z
Turn the ignition switch off then to the
Yes
Go to the appropriate DTC troubleshooting. (See
DTC TABLE [MZI-3.7]
.)
2008 Mazda CX-9 Grand Touring
2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:08:39 AM
Page 276
© 2005 Mitchell Repair Information Company, LLC.
