DTC P0625 [MZI-3.7]
DTC P0625 (MZI-3.7) DETECTION CONDITIONS AND POSSIBLE CAUSES
13
z
Perform the "AFTER REPAIR
PROCEDURE". (See
AFTER
REPAIR PROCEDURE [MZI-3.7]
.)
z
Are any DTCs present?
Yes
Go to the applicable DTC inspection. (See
DTC
TABLE [MZI-3.7]
.)
No
Troubleshooting completed.
DTC P0625
Generator field terminal circuit low
DETECTION
CONDITION
z
The PCM monitors generator load from the generator/regulator in the form of
frequency. The concern indicates the input is lower than the load should be in normal
operation. The load input could be low when no generator output exists.
POSSIBLE
CAUSE
z
Drive belt damaged
z
Generator malfunction
z
Short to ground between generator terminal RC and PCM terminal 2S
z
Short to ground between generator terminal LI and PCM terminal 2AG
z
Open circuit between terminal B and battery positive terminal
z
Low system voltage
z
Connector or terminal malfunction
2008 Mazda CX-9 Grand Touring
2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:08:39 AM
Page 284
© 2005 Mitchell Repair Information Company, LLC.
