DIAGNOSTIC PROCEDURE
DTC B1055, B1996, B1997, B1998, B1999 DIAGNOSTIC PROCEDURE
STEP
INSPECTION
ACTION
1
INSPECT PASSENGER-SIDE SIDE AIR BAG
MODULE
z
Using the M-MDS, verify the following
PID/DATA monitor.
(See
PID/DATA MONITOR TABLE
.)
{
RES_SAB_P
z
Is the resistance of the passenger-side side air
bag module normal?
{
Resistance:
1.0-9.7 ohms
Yes
Replace the SAS control module. (See
SAS CONTROL MODULE
REMOVAL/INSTALLATION
.)
No
Go to the next step.
INSPECT PASSENGER-SIDE SIDE AIR BAG
MODULE CONNECTOR
WARNING:
z
Handling the air bag system components
improperly can accidentally deploy the air
bag modules and pre-tensioner seat belts,
which may seriously injure you. Read the
service warnings and cautions before
handling the air bag system components.
(See AIR BAG SYSTEM SERVICE
WARNINGS .)
Yes Replace the air bag wiring harness.
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:18:46 AM
Page 45
© 2005 Mitchell Repair Information Company, LLC.
