Fig. 248: Identifying Sun Gear Input Drum Of Transaxle Case
Courtesy of MAZDA MOTORS CORP.
41. Apply ATF to the bearing race and the thrust bearing, and then install them to the transaxle case.
42. Install the C1 clutch component to the transaxle case.
Fig. 249: Identifying C1 Clutch Component Of Transaxle Case
Courtesy of MAZDA MOTORS CORP.
43. Apply ATF to the bearing race and the thrust bearing, and then install them to the transaxle case.
44. Install the input shaft and the front planetary gear to the transaxle case.
CAUTION:
z
If the input shaft is not hold during installation, the thrust
washer might be come off.
NOTE:
z
Align the spline of the C1 clutch drive plates before installing the
input shaft and front planetary gear.
z
Hold the C1 clutch component and install the front planetary gear
while holding the input shaft.
2008 Mazda CX-9 Grand Touring
2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
Microsoft
Sunday, November 15, 2009 10:28:17 AM
Page 136
© 2005 Mitchell Repair Information Company, LLC.
