approx. 3 s
, and goes out.
z
The keyless warning light illuminate when the ignition switch is turned to the ON position for
approx. 1 min
, and goes out.
24. After verifying that the keyless warning light goes out, turn the ignition switch to the LOCK position.
25. Verify that the all keys can start the engine for
5 s or more
after the procedure.
NO.4 PCM REPLACEMENT PROCEDURE
Condition
z
Prepare a valid key or a card key that can start the engine.
Procedure
Fig. 91: PCM Replacement Procedure
Courtesy of MAZDA MOTORS CORP.
1. Turn the ignition switch to the LOCK position.
2. Connect the M-MDS to the DLC-2. (See
M-MDS MENU
.)
3. Using a valid key or card key, turn the ignition switch to the ON position.
4. Verify that the keyless warning light illuminates for
approx. 3 s
, and then goes out.
5. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
Select "Body".
Select "Security".
z
When using the PDS (Pocket PC)
CAUTION:
z
Before starting Step 1, complete the procedure for PCM
replacement. (See PCM REMOVAL/INSTALLATION [MZI-3.7] .)
NOTE:
z
Although the security light remains illuminated and DTC 23 is
displayed after approx. 1 min, this does not indicate an improper
procedure. Continue to perform the procedure as indicated.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:59 AM
Page 68
© 2005 Mitchell Repair Information Company, LLC.
