Fig. 5: Symptom Troubleshooting Chart
Courtesy of MAZDA MOTORS CORP.
NO.1 ANY OF THE FOLLOWING LIGHTS DO NOT ILLUMINATE WHEN
IGNITION SWITCH TURNED TO ON POSITION: (ABS WARNING LIGHT,
BRAKE SYSTEM WARNING LIGHT, DSC INDICATOR LIGHT AND/OR TCS
OFF LIGHT) [DSC/RSC]
TROUBLESHOOTING CHART
DIAGNOSTIC PROCEDURE
DIAGNOSTIC PROCEDURE
1
Any of the following lights do not illuminate when the ignition switch is turned to the ON
position: (ABS warning light, BRAKE system warning light, DSC indicator light and/or TCS
OFF light).
[TROUBLESHOOTING HINTS]
z
Inspect each light in the instrument cluster for malfunction
z
Poor connection at DSC/RSC HU/CM connector
STEP
INSPECTION
ACTION
1
INSPECT FOR DTCS IN DSC/RSC
HU/CM
z
Inspect the DTC for the ON-BOARD
DIAGNOSTIC SYSTEM.
z
Have DTCs been stored in memory?
Yes
Perform the applicable DTC inspection. (See
ON-BOARD DIAGNOSIS [DSC/RSC]
.)
No
Go to the next step.
2
INSPECT WHETHER MALFUNCTION
IS IN INSTRUMENT CLUSTER
SYSTEM OR OTHER SYSTEM
z
Do other warning and indicator lights
illuminate when the ignition switch is
turned to the ON position?
Yes Go to the next step.
No
Inspect or repair the instrument cluster (power
supply system, ground system).
2008 Mazda CX-9 Grand Touring
2008 BRAKES Symptom Troubleshooting (DSC/RSC) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:41:34 AM
Page 7
© 2005 Mitchell Repair Information Company, LLC.
