Mazda CX-9 Grand Touring 2008, Руководство пользователя

Страница: 486 / 2589

2
(See FRONT ABS WHEEL-
SPEED SENSOR INSPECTION .)
(See REAR ABS WHEEL-SPEED
SENSOR INSPECTION [2WD] .)
(See REAR ABS WHEEL-SPEED
SENSOR INSPECTION [AWD] .)
z
Is the clearance normal?
Clearance
Front: 0.7-1.5 mm {0.028-0.059 in}
Rear (2WD): 0.3-1.1 mm {0.012-
0.043 in}
Rear (AWD): 0.95-1.75 mm {0.038-
0.068 in}
No
Replace the ABS wheel-speed sensor, then go to
Step 4.
(See FRONT ABS WHEEL-SPEED SENSOR
REMOVAL/INSTALLATION .)
(See REAR ABS WHEEL-SPEED SENSOR
REMOVAL/INSTALLATION [2WD] .)
(See REAR ABS WHEEL-SPEED SENSOR
REMOVAL/INSTALLATION [AWD] .)
3
VISUALLY INSPECT ABS SENSOR
ROTOR FOR FOREIGN MATERIAL
ADHERING OR IMPROPER
INSTALLATION
z
Is the result normal?
Yes Go to the next step.
No
Replace the front drive shaft, rear wheel hub
component (2WD) or rear drive shaft (AWD),
then go to the next step.
(See FRONT DRIVE SHAFT
REMOVAL/INSTALLATION .)
(See WHEEL HUB COMPONENT
REMOVAL/INSTALLATION [2WD] .)
(See REAR DRIVE SHAFT
REMOVAL/INSTALLATION .)
4
VERIFY THAT THE SAME DTC IS
NOT PRESENT
z
Clear the DTC from the memory.
(See ON-BOARD DIAGNOSTIC
[DSC/RSC] .)
z
Start the engine and drive the vehicle
at
10 km/h {6.2 mph} or more.
z
Are the same DTCs present?
Yes
Repeat the inspection from Step 1.
If the malfunction recurs, replace the DSC/RSC
HU/CM, then go to the next step.
(See
DSC/RSC HU/CM
REMOVAL/INSTALLATION .)
No Go to the next step.
5
VERIFY THAT NO OTHER DTCS
ARE PRESENT
z
Are any other DTCs output?
Yes
Go to the applicable DTC inspection.
(See
ON-BOARD DIAGNOSTIC [DSC/RSC] .)
No DTC troubleshooting completed.
2008 Mazda CX-9 Grand Touring
2008 BRAKES On-Board Diagnostic (DSC/RSC) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:50:13 AM Page 30 © 2005 Mitchell Repair Information Company, LLC.