AIR BAG WIRING HARNESS REPAIR
z
Incorrectly repairing an air bag wiring harness can accidentally operate (deploy) the air bag
module and pre-tensioner seat belts. If a problem is found in the air bag wiring harness, always
replace the wiring harness with a new one.
Fig. 8: Precaution For Air Bag Wiring Harness Repair
Courtesy of MAZDA MOTORS CORP.
DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION
1. Turn the ignition switch to the LOCK position.
2. Disconnect the negative battery cable and wait for
1 min or more.
3. Remove in the order indicated in the table.
Fig. 9: Identifying Driver-Side Air Bag Module Components & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
4. Install in the reverse order of removal.
WARNING:
z
Handling the air bag module improperly can accidentally deploy the
air bag module, which may seriously injure you. Read the air bag
system service warnings and cautions before handling the air bag
module. (See AIR BAG SYSTEM SERVICE WARNINGS.) (See AIR
BAG SYSTEM SERVICE CAUTIONS.)
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS Air Bag System - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:16:38 AM
Page 8
© 2005 Mitchell Repair Information Company, LLC.
