DTC B1055, B1996, B1997, B1998, B1999
DTC B1055, B1996, B1997, B1998, B1999 DETECTION CONDITION AND POSSIBLE CAUSE
z
Inspect the wiring harness between SAS control
module terminal 2J and driver-side pre-tensioner
seat belt terminal A, SAS control module
terminal 2N and driver-side pre-tensioner seat
belt terminal B for the following:
{
Short to ground
{
Short to power supply
{
Open circuit
z
Is the wiring harness normal?
No
Replace the air bag wiring harness.
DTC
B1055 Passenger-side side air bag module and other air bag module circuits short
B1996 Passenger-side side air bag module circuit short to power supply
B1997 Passenger-side side air bag module circuit short to body ground
B1998 Passenger-side side air bag module circuit resistance high
B1999 Passenger-side side air bag module circuit resistance low
DETECTION
CONDITION
z
Resistance other than
1.0-9.7 ohms
detected in passenger-side side air bag module
circuit
z
Malfunction in wiring harness between passenger-side side air bag module and SAS
control module
WARNING:
z
Detection conditions are for understanding the DTC outline before performing an
inspection. Performing an inspection according to only the detection conditions
may cause injury due to an operating error, or damage the system. When
performing an inspection, always follow the inspection procedure.
POSSIBLE
CAUSE
z
Open or short circuit in wiring harness between passenger-side side air bag module
and SAS control module
z
Passenger-side side air bag module malfunction
z
SAS control module malfunction
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:18:46 AM
Page 44
© 2005 Mitchell Repair Information Company, LLC.
