73000EZ
Kit Number
TOOLS LIST
Description ......................................................... Qty
Power drill ..................................................................... 1
3/8", 1/4" Drill bit .................................................... 1 ea.
3/8", 1/2", 5/16", 9/16" Sockets and ratchet ......... 1 ea.
Wire stripping/crimping tool ......................................... 1
Sharp razor knife .......................................................... 1
Manifold
Compressor
*Smart phone not included
MN-1159 • (012109) • ERN 9886
Introduction
WirelessAIR™ App only, No Controller with EZ Mount™ combines a manifold and
compressor into a single, easy-to-install unit, along with wiring harness and accessories
needed to connect to vehicle power and air springs (purchased separately).
It is important to read and understand the entire installation guide before beginning
installation or performing any maintenance, service or repair. The information here
includes a hardware list, step-by-step installation information and safety information.
USING THE SYSTEM
Refer to the WirelessAIR™ App only, No Controller with EZ Mount™ User Guide
included with this kit to learn how to operate the system.
WARNING
DANGER
CAUTION
*
NOTATION EXPLANATION
Hazard notations highlight information that must be observed to help minimize risk of
personal injury or possible improper installation, which may render the vehicle unsafe.
INDICATES IMMEDIATE HAZARDS WHICH WILL RESULT IN SEVERE PERSONAL
INJURY OR DEATH.
INDICATES HAZARDS OR UNSAFE PRACTICES WHICH COULD RESULT IN SEVERE
PERSONAL INJURY OR DEATH.
INDICATES HAZARDS OR UNSAFE PRACTICES WHICH COULD RESULT IN DAMAGE
TO THE MACHINE OR MINOR PERSONAL INJURY.
