Fig. 88: Key Additional Programming Procedure (If Two Or More Keys Are To Be Programmed)
Courtesy of MAZDA MOTORS CORP.
1. Prepare key 2 for programming.
2. Start the engine using a valid key 1 or card key 1.
3. Verify that the security light illuminates for
approx. 3 s
, and then goes out.
4. Turn the ignition switch to the LOCK position.
5. Connect the M-MDS to the DLC-2. (See
M-MDS MENU
.)
6. Using key 2, turn the ignition switch to the ON position.
7. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
Select "Body".
Select "Security".
z
When using the PDS (Pocket PC)
Select "Programming".
8. Then, select items from the screen menu in the following order.
z
Select "PATS Functions".
9. Select "Program additional ignition key" from the M-MDS screen menu and perform the procedure
according to the M-MDS screen
CAUTION:
z
Do not place the card key in the vehicle when starting the
engine with the valid key, otherwise programming cannot be
performed. If the engine is started with the card key, remove the
card key from the vehicle after the engine is started.
NOTE:
z
Although the security light starts flashing and DTC 15 is displayed
after approx. 1 min, this does not indicate an improper procedure.
Continue to perform the procedure as indicated.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:58 AM
Page 64
© 2005 Mitchell Repair Information Company, LLC.
