Courtesy of MAZDA MOTORS CORP.
NO.4 ENGINE MOUNT BRACKET INSTALLATION NOTE
1. Install the No.4 engine mount bracket to the transaxle and temporarily tighten nuts.
2. Temporarily tighten bolt.
3. Temporarily tighten bolt A and nuts B, C.
4. Tighten bolt A, nuts B and C in the order of B-->A-->C.
5. Tighten bolt D.
Tightening torque
Bolt A, Nut B, C: 66.6-93.1 N.m {6.80-9.49 kgf.m, 49.2-68.6 ft.lbf}
Bolt D: 74.5-104.9 N.m {7.60-10.69 kgf.m, 55.0-77.3 ft.lbf}
Fig. 71: Identifying No.4 Engine Mount Bracket
Courtesy of MAZDA MOTORS CORP.
NO.1 ENGINE MOUNT INSTALLATION NOTE
1. Install the No.1 engine mount, No.1 engine mount bracket and the front crossmember as a single unit.
(See
FRONT CROSSMEMBER REMOVAL/INSTALLATION
.)
Fig. 72: Identifying No.1 Engine Mount
2008 Mazda CX-9 Grand Touring
2008 TRANSMISSION Automatic Transaxle (AW6A-EL, AW6AX-EL) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:29:31 AM
Page 58
© 2005 Mitchell Repair Information Company, LLC.